Tascam DR-60DmkII – L’unico registratore portatile progettato filmmakers
TASCAM's DR-60DmkII, an update of the award winning DR-60D, is the audio recording solution for on-set filmmakers and videographers. The streamlined design fits perfectly under a DSLR camera rig, without relying on bulky recorders or the limited audio quality of the camera’s microphone in. ProSound Network Best of Show The streamlined design fits perfectly under a DSLR camera rig, without relying on bulky recorders or the limited audio quality of the camera’s microphone in. The DR-60DmkII is the next generation of 4-track solid-state recording, based on TASCAM’s decades of recording innovation. The upgraded HDDA microphone preamps provide up to 64dB of gain, capturing every nuance of a performance. Up to four channels at a time can be recorded to the internal SD Card, at up to 96kHz/24-bit WAV file resolution. Two of the mic inputs utilize locking XLR connectors with 48V phantom power, the other two use an 1/8” stereo connector for wireless and lavaliere microphones. A Camera Output sends the mic mix to the camera for later synchronization, and a Camera Input is provided for monitoring playback. An additional headphone out and line out assist the crew during filming. The DR-60DmkII is designed for low-noise operation, including soft touch buttons and dedicated gain controls. Multiple recording modes are available on the DR-60DmkII. Four-Channel Mode records all four microphone inputs. Dual Recording is an alternate setting, capturing a copy of your audio at a lower level for a distortion-free safety track. Menus and operation are well laid out, owing to decades of innovative recording design. Reach beyond the limited performance of your camera’s audio to capture the other half of your film. At a cost less than competing preamps, the TASCAM DR-60DmkII is the ultimate 4-track recorder designed for filmmakers, television, live events and web broadcast. Video
Guarda il video sul canale Youtube TAV
Features
Record to SD/SDHC card (Up to 32GB)
Simultaneously record up to 4 tracks
Record Modes: MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
Recording format: 44.1/48/96kHz, 16 or 24-bit, WAV/BWF
TASCAM HDDA microphone preamps wth 120dB EIN and 64dB of gain
Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
Two combo XLR/TRS inputs support +4dBu mic/line level input
Phantom power to channels 1/2 (24V or 48VDC on XLRF)
Plug-in power and high-output mic input supported on inputs 3-4
CAMERA OUT connector for output from the DR-60DmkII mixer (adjustable gain)
CAMERA IN connector for sound monitoring from the camera
Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
50mW/ch headphone amplifier
Tripod mounting socket (bottom) and mounting screw attachment (top)
Handles protect the screen and can be used to attach a shoulder strap
Soft-Touch Rubber Keys for silent operation
HOLD switch to prevent accidental operation
QUICK button feature for easy access to various functions
128×64 pixel LCD with backlight
USB 2.0 connection for high-speed transferring of files
Mini USB cable included
Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
Can extend battery life with BP-6AA battery pack (sold separately)
Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
Internal mixer: PAN and LEVEL controls
Low cut filter (40/80/120Hz)
Limiter (1/L and 2/R can be selected for linked operation)
Delay function for microphone distance adjustment (up to 150ms)
M-S decode functionSlate tone generator (AUTO/MANUAL)
Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
Selectable slate tone generation. (3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated)
File naming format can be set to use a user-defined word or date
Dual-recording function allows two files to be recorded simultaneously at different levels
Auto-record function can automatically start and stop recording at set leve
lPre-recording function allows the unit to record a 2 second sound buffer before recording is activated
Self-timer function for solo recording
New file starts recording automatically without interruption when maximum file size is reached
Track incrementing function allows a recording to be split by creating a new file when desired
Jump back and play function
Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
Resume function to memorize the playback position before the unit is turned off
MARK function up to 99 points per audio track
DIVIDE function Specifications
Recording media
SD card(64MB to 2GB), SDHC card(4GB to 32GB)
Recording format
WAV
44.1/48/96kHz, 16/24bit
BWF
44.1/48/96kHz, 16/24bit
Number of channels
4-channel (stereo x2)
Analog audio input
1/L, 2/R connectors
Connector
XLR-3-31 (1:GND, 2:HOT, 3:COLD)/6.3mm(1/4″)TRS standard jack
Set to “MIC / MIC+PHANTOM”
Input impedance
2k ohms
Phantom power
48V +/-4V(10mA/CH) / 24V +/-4V(10mA/CH)
Maximum input level
0dBu
Minimum input level
-72dBu
MIC input gain
TRIM MAX
LOW
+11dB
MID
+36dB
HIGH
+52dB
HIGH+PLUS
+64dB
Set to “LINE”
Input impedance
10k ohms or more
Standard input level
+4dBu
Maximum input level
+24dBu
3-4 connector
Connector
3.5mm (1/8″) stereo mini jack (this connector can be supplied plug-in power)
Input impedance
10k ohms
Maximum input level
+10dBV
Minimum input level
-50dBV
MIC input gain
TRIM MAX
LOW
+3dB
HIGH
+26dB
HI + PLUS
+38dB
CAMERA IN connector
Connector
3.5mm (1/8″) stereo mini jack
Input impedance
10k ohms
Standard input level
-10dBV
Maximum input level
+6dBV
Analog audio output
CAMERA OUT connector
Connector
3.5mm (1/8″) stereo mini jack
Output impedance
200 ohms
Standard output level
-50dBV
Maximum output level
-30dBV
LINE OUT connector
Connector
3.5mm (1/8″) stereo mini jack
Output impedance
200 ohms
Standard output level
-10dBV
Maximum output level
+10dBV
PHONES connector
Connector
3.5mm (1/8″) stereo mini jack
Maximum output level
50mW + 50mW
USB
Connector
Mini-B type
Format
USB2.0 HIGH SPEED mass storage class
REMOTE
Connector
2.5mm TRS jack
Power
Four AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately)
Power consumption
5.4W
Continuous operation time
2ch WAV, 44.1kHz, 16bit rec
DR-60D
Alkaline batteries (EVOLTA)
About 2:30 min (Phantom on) About 4:30 min (Phantom off)
NI-MH batteries (eneloop)
About 3:15 min (Phantom on) About 5:00 min (Phantom off)
NI-MH batteries (eneloop pro)
About 3:45 min (Phantom on) About 6:00 min (Phantom off)
DR-60D+BP-6AA
Alkaline batteries (EVOLTA)
About 5:30 min (Phantom on) About 10:30 min (Phantom off)
NI-MH batteries (eneloop)
About 7:30 min (Phantom on) About 12:00 min (Phantom off)
NI-MH batteries (eneloop pro)
About 9:30 min (Phantom on) About 14:30 min (Phantom off)
Dimensions
133(W)×93.2(H)×78(D)mm (with the top adapter attached)
Weight
510g (not including batteries)
Operating temperature
0ËC to 40ËC
Standard accessories
USB cable, warranty card, Owner's manual
